The PM Series relays offer 4 double throw poles (4PDT) for up to 35 amp at 240 VAC or 20 amps at 28VDC. Product also is capable of 10 amps tungsten switching. Screw terminals (#M4) are standard but .250” quick connects are also available.
This is the same Potter & Brumfield relay that we acquired from them in 2003! It is made to the same original specifications. You can check which of our Distributors have inventory for the relay you need by clicking the Inventory Locator near the top of the left column and enter the part number you need. Contact us if you have any questions.
Additional contact configurations and coil options are available – please use the RFQ/RFI tab above to submit your request.
This is the same Potter & Brumfield relay that we acquired from them in 2003! It is made to the same original specifications. You can check which of our Distributors have inventory for the relay you need by clicking the Inventory Locator near the top of the left column and enter the part number you need. Contact us if you have any questions.
Additional contact configurations and coil options are available – please use the RFQ/RFI tab above to submit your request.
Specifications
|
Contacts
|
Coil
|
Timing
|
Dielectric Strength
|
Temperature
|
Life Expectancy
|
Miscellaneous
Specifications
Series |
N/A PM |
Type |
N/A Screw Terminals (#M4 - 7.0 x 5mm) |
Contact Arrangement |
N/A 4 form C (4PDT) |
Coil Voltage |
N/A 38 VDC |
Contacts
Contact Configuration |
N/A 4PDT |
Contact Material |
N/A Silver Alloy |
Contact Rating |
N/A 35 A |
Contact Rating 120 / 240VAC Resistive |
N/A 35 A |
Contact Rating 28VDC Resistive |
N/A 20 A |
Motor 240VAC 1 Phase |
N/A 1.5 hp |
Contact Resistance, Initial |
N/A 100 milliohms max at 6VDC |
Coil
Coils Available |
N/A AC and DC |
Nominal Coil Power AC |
N/A 14 VA |
Nominal Coil Power DC |
N/A 4.4 W |
Input Voltage Tolerance - AC |
N/A 85% to 110% of nominal |
Input Voltage Tolerance - DC |
N/A 80% to 110% of nominal |
Drop-out voltge |
N/A 10% of nominal |
Duty |
N/A Continuous |
