Request Information
  • 112 Series - Low Coil Power Sensitive Relays - Industrial Pin Out

    112 Series - Low Coil Power Sensitive Relays - Industrial Pin Out

    (23)

    The 112 series relays are capable of sensing extremely low current flow. They are frequently used to detect ground faults or in applications where applied voltage varies significantly. DC versions can sense currents as low as 0.61mA and tolerate voltages up to 10X minimum. AC versions can sense currents as low as 0.74mA and can tolerate voltages up to 5X minimum. Single pole DC coil versions use as little as 12mW of power while double pole versions can be as low as 60mW. Single pole AC coil version use as little as 160mVA while double pole versions can be as low as 800mVA. Pick-up or drop-out current can be fine tuned by end user via knurled thumbwheel after loosening locknut. Remove all power to make adjustments.

    Additional contact configurations and coil options are available – please use the RFQ/RFI tab above to submit your request.
    CSA               Made in U.S.A.

  • 292 Series - Low Coil Power Sensitive Relays - Square Base

    292 Series - Low Coil Power Sensitive Relays - Square Base

    (4)

    The 292 series is a square base, bladed version of DC sensitive relay. Single pole versions operate on as little as 125mW and are capable of switching 5 amps. Power requirements increase by 125mW per pole up to 3 poles. Operating current can be as low as 3.5mA. The 292 series can withstand wide voltage ranges of up to almost 4X minimum voltage without overheating. The package on this series is typically socket mounted. It can also be panel mounted allowing direct connections to terminals with quick-connects or soldering.

    Additional contact configurations and coil options are available – please use the RFQ/RFI tab above to submit your request.
    UL Recognized               Made in U.S.A.

  • 392 Series - Low Coil Power Sensitive Relays - Octal Base

    392 Series - Low Coil Power Sensitive Relays - Octal Base

    (7)

    The 392 series is an industry standard “octal” base version of DC sensitive relay. Single pole versions operate on as little as 125mW and are capable of switching 5 amps. Power requirements increase by 125mW per pole up to 3 poles. Operating current can be as low as 11.1mA. The 392 series can withstand wide voltage ranges of up to almost 4X minimum voltage without overheating. Single pole and double pole versions have 8 pin bases. The 3 pole version has 11 pins. All are intended for socket mounting.

    Additional contact configurations and coil options are available – please use the RFQ/RFI tab above to submit your request.
    UL Recognized              Made in U.S.A.